XCF inflatable barite flotation machine

XCF inflatable barite flotation machine

XCF inflatable barite flotation machine has self-priming slurry capacity, can be horizontally configured, does not require foam pump, but the power consumption is slightly higher than KYF, while KYF type has no self-priming slurry capacity and low power; therefore, XCF type is generally used. The KYF type is configured as a unit, the XCF type is a suction tank, the KYF type is a DC tank, and the combined unit can be horizontally arranged without a foam pump.

XCF inflatable barite flotation machine
 

Application of XCF inflatable barite flotation machine:

 
It can be widely used in the selection of non-ferrous metals, ferrous metals, and non-metallic minerals, and is suitable for rough selection and sweeping operations of large and medium-sized flotation plants.
 

Working Principle of XCF inflatable barite flotation machine

When the XCF flotation machine is working, with the rotation of the impeller, the slurry in the tank is sucked from the periphery of the tank through the bottom of the tank to the impeller blades. At the same time, the air supplied by the blower through the hollow shaft and the impeller chamber is distributed. And also enter it. After the slurry and air are thoroughly mixed between the blades, they are pushed upward from the periphery of the upper half of the impeller, and the stator is stabilized and oriented to enter the entire groove. The bubble rises to the foam stabilization zone, and after the enrichment process, the foam overflows from the overflow weir and enters the foam tank. A part of the slurry flows to the lower part of the impeller, and then is stirred by the impeller to remix to form mineralized bubbles, and the remaining slurry flows down to a trough until it finally becomes a tailings.

 

 

 

  1. Product Features of XCF inflatable barite flotation machine

    1. Both XCF and KYF flotation machines are inflated flotation machines with small impeller diameter and low circumferential speed, which can reduce power by 30-50%. There is an air distributor in the tank, so the air is evenly dispersed; the impeller is a centrifugal pump. The utility model can fully suspend the solid particles; the U-shaped groove structure can make the tailings precipitate less; the impeller structure and the blade gap flow design are reasonable, the impeller wear is relatively uniform, and the impeller and the stator have a long service life.

    2. KYF type has no self-priming slurry capacity and low power; while XCF type has self-priming slurry capacity and can be horizontally arranged without foam pump. The difference is that a stator is specially set above the impeller to form a special negative pressure. District, but the power consumption is slightly higher than KYF. Therefore, XCF type and KYF type are generally configured as units, XCF type is suction tank, KYF type is DC tank, and the combined unit can be horizontally arranged without foam pump.

    3. The combined unit of XCFII/KYFII flotation machine adopts “U” type trough body, hollow shaft is inflated and suspended stator, especially a new impeller is adopted. This is a cone-shaped impeller with a blade that is inclined at an angle. It is similar to a high-speed centrifugal pump wheel. It has a large amount of slurry, small head, low power consumption and simple structure. At the same time, the air is well dispersed and the impeller is a centrifugal pump. The function is to keep the solid in a suspended state in the tank, and the operation and management are convenient.

 

Technology Data of XCF inflatable barite flotation machine

XCF type pneumatic mechanical stirring flotation machine technical performance
Model Effective volume m 3 Processing capacity m 3/min Impeller diameter mm Impeller rotation number r/min Blower air pressure kpa Maximum inflation amount m 3/m 2 ·min Motor power kw Single tank weight kg
Stirring Scraper
XCF-1 1 0.2-1 400 358 ≥12.6 2 5.5 1.1 1154
XCF-2 2 0.4-2 470 331 ≥14.7 7.5 1659
XCF-3 3 0.6-3 540 266 ≥19.8 11 1.5 2259
XCF-4 4 1.2-4 620 215 ≥19.8 15 2669
XCF-8 8 3-8 720 185 ≥21.6 22 3968
XCF-16 16 4-16 860 160 ≥25.5 37 6520
XCF-20 20 5-20 910 155 ≥25 45 9200
XCF-24 24 6-24 950 153 ≥30.4 55 9660



KYF type pneumatic mechanical stirring flotation machine technical performance
Model Effective volume m 3 Processing capacity m 3/min Impeller diameter mm Impeller rotation number r/min Blower air pressure kpa Maximum inflation amount m 3/m 2 ·min Motor power kw Single tank weight kg
Stirring Scraper
KYF-1 1 0.2-1 340 281 ≥12.6 2 4 1.1 826
KYF-2 2 0.4-2 410 247 ≥14.7 5.5 1419
KYF-3 3 0.6-3 480 219 ≥19.8 7.5 1.5 1885
KYF-4 4 1.2-4 550 200 ≥19.8 11 2206
KYF-8 8 3-8 630 175 ≥21.6 15 3600
KYF-16 16 4-16 740 160 ≥25.5 30 5900
KYF-20 20 5-20 780 155 ≥25 37 8240
KYF-24 24 6-24 800 150 ≥30.4 37 8540

 

For product information and pricing, Chat with sales agent:

Chat