Barite Grinding Mill

Barite Grinding Mill

Types of Barite Grinding Mill:

—— five models: HGM80, HGM90, HGM100, HGM125and HGM1680L
——finished production fineness: 250meshes-2500meshes, 5-74 micron
——the capacity (ton/hour) ranges from 0.4T/H to 30T/H
 
Application of Barite Grinding Mill:

Barite grinding Mill also is named Barite mill, Barite grinding machine,Barite grinding plant, is suitable for grinding Barite into fine powder.

Barite grinding Mill is the new type mining equipment for making micro powders, fine powders,which is widely applied in the industries of metallurgy, mining, chemistry, cement, construction, refractory materials, ceramics, and so on.The purpose of the micro powder grinding millis for super-fine grinding materials with hardness less than 9 in Moh's scale and humidity less than 6 percent such as kaolin, limestone, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds.

Structure Of Barite grinding Mill

Barite grinding Mill Production line: consists of hammer crusher, bucket elevator, storage hopper, vibrating feeder, main unit, inverter classifier, cyclone collector, pulse deduster system, high pressure positive blower, air compressors and electrical control systems.

 
Work Principle of Barite Grinding Mill:
HGM series barite grinding mill mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.
 
After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turn plate by vibrating feeder and sloping feeding pipe. When the grinding mill is at work, the main bearing and each dial are driven by electromotor through reducer, and all the grinding rollers are rolling in the ring channels driving by dial through plunger. The materials are driven to the edge of the turn plate by the centrifugal force and fall down into the grinding chambers. The high-pressure air blower constantly inhales air, airflow with crushed materials are brought to classifier whose high-speed impeller will screen the airflow: The unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; A small proportion of the fine powders, with airflow, moves to the dust cleaner. The materials from the above two lots are sent by the conveyor to get finished powders packed. In addition, filtered clean air will be emitted from muffler in the end.
 
Barite Grinding Mill,Barite Grinding Machine,Barite Grinding Plant

  1. Features of barite grinding mill:

    High Efficiency
    Under the same finished final size and the same motor power, the capacity of barite grinding mill is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
    Long lifecycle of spare parts
    The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.
    High safety and reliability
    As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
    High fineness, flexible adjustment
    The final fineness of the grinding materials can be adjusted between 250 meshes and 2500 mesh (74-5 micron), and the product fineness can reach D97≤5μm.
    Environment-friendly
    The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
    Advanced intelligent speed control device
    Convenient adjusting, more uniform particle size.

 Main specification of barite grinding mill:

Model

HGM80

HGM90

HGM100

HGM125

HGM1680L

Ring Diameter(mm)

800

900

1000

1250

1680

Ring Number (PCS)

3

3-4

4

4

4

Roller Number(PCS)

18-21

24-29

28-36

30-44

30-40

Main Shaft Speed (r. p. min)

230-240

200-220

180-200

135-155

120-130

Input Size (mm)

≤10

≤10

≤15

≤15

≤20

Finished Size (um/mesh)

74-5

(200-2500)

74-5

(200-2500)

74-5

(200-2500)

100-6

(150-2000)

100-9

(150-1500)

Capacity (t/h)

0.4-4.5

0.6-6.5

1-9

2-16

3.8-30

Outlet Size L*W*H (m)

13.9*4*6.2

14.7*4.8*7.2

18*4.6*8.6

14*9*10.25

26.3*7.5*11.9

 

 please leave messages in our website, email me or leave me your contact details and tell me details you want, I will get back to you within one business day, thank you!

For product information and pricing, Chat with sales agent:

Chat